Archive for category AutoCAD

Site Plan – Poultry Farm Enterprise

I require a site plan and a landscape plan drawn to scale on an A3 sized sheet, and provided to me in Autocad and PDF format. I have provided both drawings in sketched format, and I would like the plans to look similar (or better) and I am open to the freelancer making decisions on this. I am prepared to pay well for this project, and their will be an additional two plans required in a couple of days time which I will post on freelancer. If changes are required to these plans, I will pay accordingly. The aerial photgraph will show you a scale and the existing four poultry sheds. These are to be extended as well as the construction of six additional poultry sheds. All dimensions are written on the sketched site plan for these. Please ask me questions if you need clarification.

cheers

Troy

Tags: , , , , , , , , , , , , , , , ,

PRINTED CIRCUIT BOARD DEFECT INSPECTION

The Printed Circuit Board (PCB) manufacturing Industries have an inspection system for the defects on Surface Mounted Device (SMD).There are five types of defects, namely, missing component, misalignment,
wrong orientation of IC chip, wrong parts and poor solder joints,component rotation etc. Sometimes industries want to measure the height of the component.
Although there are many components on one PCB and as the size of PCB become smaller the the defect inspection becomes cricial. There defects are very very thin but they causes the huge damages.For this purpose PCB inspection takes place in many PCB manufacturing industries before hand over the PCB to the customer.
To inspect the PCB; AOI (Automatic Optical Inspection) system is being used. This system has the 5 cameras (gray scale) and many LEDs. 4 cameras are in 30 degree angle and 1 is vertical over the PCB. This machine automatically loads the PCB. Images get captured by gray scale camera over the PCB. By doing some image processing we can examine whether the component is displaced or not and also the height of the component.
I have some 2D gray scale images of PCB inspection. I want to measure the height of the component (from 2D to 3D measurement). And also want to measure whether the component is displaced, rotates or not. And if it is displaced; then how many pixels it is being displaced and how much angle it is being rotated.
NOTE : For this I would like to use Open CV Image processing language. The attachment contain some example images which I want to inspect.

Tags: , , , , , , , , , , , , , , , ,

3d Desk Designer

We are looking to redo some of our main office desk and like to take the opportunity to design something totally custom. We have a rough sketch of the design. We like to have the sketch transformed into a 3d rendering, with reference to real-life measurements so that we can get it built. The desk will be a surround one, for one person, possibly fitting 2, meaning it will be in the shape of a U, but with the vertical lines slanted. It will consists of roughly 5 layers, with the top layer holding FLAT LCDs to the bottom layer holding a computers and some rack equipment (standard 19"). It must be modular, meaning to be taken part easily, and also contain strategic holes for ventilation, cabling, fans, keyboard / mouse tray. It will have various layers and openings. Final spec will be provided as needed to fix design costs. We are very clear on what we need and need someone who can create an illustration, and resembling a life-size desk using mostly a wood texture, and some metal hinges, glass doors, trays, etc.

If you have any experience doing this or you have reasons to believe you can do it, please submit samples and indicate what design package you use. You must have background in 3d rendering and an eye for detail.

Tags: , , , , , , , , , , , , , , , ,

Create 2-D Work Drawings In Inventor

For a project I need a person who is experienced in Autodesk Inventor 2011. I need a person to make 2-D part drawings with measurements, from 3-D parts that I provide. I have drawn a number of small 3-D parts in autodesk Inventor. I need also to make 2-D drawings and to put measurements on them, but due to some illness, I am now in a risk of not being able to meet my deadline. So it could be nice with a person to assist me with the routine task of making 2-D blueprints drawings of my parts. The person should be familiar with the common European practice of projecting parts and putting measurements. There will be about 40 parts, all of them are relatively simple. My estimate is that there is about 8-10 hours of work.
As I am a student I cant pay much, but these drawings will not be used for commercial purposes.
Many years of experience is not important in this job, but the person must have a good understanding of European practice of putting measurements e.g. ISO 128-24, ISO 128-30, ISO 129-1
The 3D parts are not finished yet but should finish soon. Then I will send them by email. Then the person will have to place them in 2-D templates also provided by me, according to the correct guidelines and put all necessary measurements.
The work should be done within a few days.
Sincerely yours
Michael Andersen

Tags: , , , , , , , , , , , , , , , ,

Sketch Up Dynamic Sunroom Model

We are a manufacturer of sunrooms.
We require a dynamic Sketchup model to draw sunroom designs. Options to include: colour, standard & custom window & door sizes, standard & custom wall heights, single slope & A-Frame versions, configurable roof pitch, glass or solid panel options. There are many dynamic aspects to the model. We will supply 2D CAD drawings.
Preferably the user is presented with a series of menus to choose width, height, colour, roof slope, etc.
The idea of this project is so our dealers can provide 3D models for their clients, and be able to preview how the sunroom will look on their clients home by overlaying the model on a digital photograph.
This quote is for the dynamic model, after satisfactory completion, we will post a new project to add bill of material & cut list.

Tags: , , , , , , , , , , , , , , , ,

Drawings For Appliance Parts For Kids Toys

This simple project is to design a few components of a childs toy. This project includes both the artistic drawings and the cad drawings needed for manufacturing. All of the created drawings should have the ability to be inserted into a cutout piece of cardboard so that they stay on. They shouldnt fall off a piece of cardboard.

1. A dial that looks something like this

http://image.shutterstock.com/display_pic_with_logo/187633/187633,1220891689,1/stock-photo-person-adjusting-washing-machine-dial-to-cold-wash-17160634.jpg

2. An on/off siwtch that toggles, this is an example:

Example 1 https://s3.amazonaws.com/s3.demandprogress.org/images/on-off-switch.jpg
Example 2 http://www-bgr-com.vimg.net/wp-content/uploads/on-off-switch.jpg

3. A handle like this http://www.kitchenideas.com.au/integrated_dishwasher.jpg

4. Some labels too in the form of stickers:

Label 1 Dishwasher cycles: http://farm1.static.flickr.com/9/17151818_9112932c33.jpg
Label 2 Washing machine settings: http://www.honuakaicafe.com/wp-content/uploads/2010/03/Washing-Machine-Knob.jpg
Label 3 Dryer settings: http://brianjnoggle.com/bsgfx/dryerdial.jpg
Label 4 Microwave Settings:

5. Generic knob to be used for whatever with a label.

6. Any other household appliance we can think of that makes sense for a kid to want to recreate. Id like to leave this open for a little artistic license.

Tags: , , , , , , , , , , , , , , , ,

.NET Addons For AutoCAD

I work regularly with autocad in 2D to make drawings. Often I find myself to do some tasks that get very tedious if I do them manually. I am looking for some addons / tools, to help me automate these tasks.

The addons should be built in .NET technologies.

If you have some experience working with .NET technology for AutoCAD please let me know.

Also note that I do not have the budget to run a whole country. If you cannot work with my budget, please do not bid.

Happy Bidding !

Tags: , , , , , , , , , , , , , , ,

Photorealistic 3d Renders

I am looking for someone to take dwg files of houses I have designed and turn them into photorealistic 3d images.
The appropriate person will be capable of producing cad images of high quality from dwg of dxf formats.
I have around 10 designs I want to have converted into 3d images.

Tags: , , , , , , , , , , , , ,

Looking For An Experienced Cad Mechanical Engineer

We are looking for a skilled cad draftsman who has a great detail of experience in both auto cad, solid works and Sketch up. We have been let down by our previous draftsman who seemed to have disappeared leaving us with some unfinished work. All that needs to be done is a couple of changes made to cad work very minimal work. Once this project has been complete we will have further cad work for yourselves if we are happy with the timings, quality, support and cost. So this is not one small project we hope it will be a start of a long term working relationship with yourselves. Future work will be presented in sketch up and we would like it to be redesigned into auto cad or solid works
What we require
We require you to have Solid works, Auto Cad and also sketchup and skype
We need you to communicate via skype, as well as speak good English so you will need a head set.
It is vital you have mechanical engineering experience and it would be also great if you have experience in sheet metal and CNC and in the manufacturing business as in some projects we may request you to help design.
We need you to be a very quick draftsman yet still maintain a high quality of work
We need you to be honest. That means we do not want you to add an extra hour on work that should only take one. We have worked with a lot of draftsman in the past we know when its too long.
We will require you to work at a rate between 5-7usd an hour + bonuses if work is done sooner than expected and is of an exceptional quality.
It would be an extra bonus if you have a good knowledge of computer components as we are essentially designing computer cases if you do not have these skills its not a big issue but if you do that would be fantastic.
Please note we will not accept bids over 30usd as this project is very very small it is only adjusting some cad files.

Tags: , , , , , , , , , , , , , , , ,

AutoCAD Automat For Calculations

I want a computer program or AutoCAD automat that will take measurements on architectural roof and floor plans (always as one ore more AutoCAD drawing files), and will calculate how much roof and ceililing materials needed (as square meters). And also it should place 30×30 or 60×60 cm. ceiling materials into the rooms in the project. I dont know if it is possible, but if it is possible and u can make it, I am ready to buy it.

Tags: , , , , , , , , , , , , , , ,

Commercial Architecture Project

im looking for an experienced interior designer who works with autocad/3d max/sketchup, located in London for a commercial project.

Tags: , , , , , , , , , , , , , , ,

XPERIENCES CENTRE

We are URGENTLY In need of some drawing in Auto CAD

basically its an outdoor adventure park with shipping containers as admin and storage areas

There are 4 shipping container for the office so buildings very basic
these are cladded with weathertex www.weathertex.com.au
sandstone block retaining wall 400x400x1100 wall around entire site with a track
chain mesh fence surrounds entire site
And the climbing tower is 15 meters in height made up of tower crane assembly

below is a request from council for the attached in Auto CAD

Dear Mr Carson

Further to our discussion earlier today, I have had a chance to review all of the information you have submitted. Please see my comments below:
The site plan you have lodged is not adequate at this stage. As part of our approval process Council must stamp approve the plans and reference them in the Decision Notice. The survey plan you sent me with the buildings included is not sufficient. We require a computer drawn plan (site plan) which depicts the subject site and proposed uses e.g. climbing wall, track, buildings etc and the plan must also show the adjoining lots as you can see on the survey plan. This plan must be drawn to scale, have a north point, title block, accurate measurements etc;
Added to this, we are generally happy with the design and treatment of the building however once again we require a computer drawn elevation which references the style/finish and colour of the surface (being the sample you have sent to me). Please note that we are generally happy with the proposed development, however we do need this formalized through the correct documentation (i.e. site plan, elevation plan);
The arborist will finish his assessment of the tree plan in the coming days; and
The landscape assessment section do not require any further information as they will condition you to provide a landscape plan as part of the approval.

Tags: , , , , , , , , , , , , , , , ,