Posts Tagged Cisco

Cisco Expert Needed

cisco expert needed for small consulting project

Tags: , , , , , , , , , , , ,

CISCO ROUTER & CALL MANAGER

We have a Cisco 2821 Router and would like to:

1. Setup Call Manager
2. Connect to SIP provider
3. Program extensions
4. Music on Hold
5. Auto Attendants
6. Find Me Follow Me
7. Documentation for Administration
8. XML Services for phones (Weather, stocks,etc)
9. VPN for remote phones.
10. Custom rings

The router has a T1 card in there but we prefer to connect to SIP provider over Ethernet (Outside static IP available)

We are looking for someone that can make the system dance and utilize unique features. If there is something great we didnt think of, let us know.

Tags: , , , , , , , , , , , , , , , ,

Ec2 To Cisco Pix Vpn Tunnel Setup

Hi

Currently Im in process of migrating my datacenter infrastructure to amazon ws, but I am having a hard time configuring the VPN.

I need to setup a VPN connection(lan 2 lan) between an Amazon EC2 Unix(any flavor) instance to a Cisco PIX 515e to handle TCP traffic. This connection must be very reliable since my app depends on it to receive all its data.

Ideally the EC2 instance should be within an Amazon VPC subnet but if not possible, I can live with it.

Thank you

Tags: , , , , , , , , , , , , , , , ,

Configuration And Maintenance Of Fortigate FG60C

What I need or require:
– Initial configuration on Fortigate by replicating CISCO ASA device which will be replaced
– Assistence in puting device in production, testing and troubleshooting
– Long term maintenance of device

What I already have versus what the provider will deliver:
– CISCO ASA configuration file
– VPN IP SEC passwords

Specific expertise/background that I am seeking:
– Experience in Fortigate device configuration

Timeframe for delivery:
– One week

Tags: , , , , , ,

Cisco CCNA – CCNP Senario Questions

I am looking for someone to write test senarion questions based on the topics covered in the Cisco CCNA and CCNP ROUTE. (If your work is good I will request for the CCNP SWITCH, TSHOOT)

The questions have to all be senario based questions,

The questions must be set in a particular way which requires the student to have to consider multiple variables to reach the right answer, the student will be working with real cisco equipment so they will have to program the devices correctly to arrive at the correct solution. All the senarion questions must be provided with the correct answers.

Each senario must be focused around setting up a network to produce an end result, a network of devices will be available to the student so they can carry out the senarios.

A senario question would be in the form below:
"You are tasked with setting up OSPF across the 3 routers. you have R1, R2, and R3, on R1 you have 16 subnets in the 192.168.1.0/28, ensure that these individual subnets are not advertised to R3 but still allow R3 still to reach them, but ensure that R3 never receives External routes from R2"

No Senario should involve more than 3 routers and 2 switches for the CCNA,

No Senario for the CCNP should exceed more than 4 routers 4 switches.

Senario questions need to ranked in difficulty from 1 to 10, 1 being easy and 10 being complex

Each senario should not take more than 2 hours to complete on average

I require each bank of senarios for the each of the topics in the Cisco CCNA and CCNP ROUTE

I require at least 100 senario based questions per month written for all the topics in the Cisco CCNA and CCNP ROUTE syllabus

I will require 2 sample senario questions before I will consider anyone for the job; please provide one on any Cisco CCNA Topic and one on any Cisco CCNP ROUTE topic

Many thanks

Tags: , , , , , ,

Webscrape For Cisco Products

We need a list compiled of Ciscos Router, Switch, and Security Products. Data must be in CSV format.

Specifications will need to include:

1. What kind of environment the device is used for – ig., Server farm, Internet backbone, Data center, etc.
2. Type and number of Ports/Slots available – ig. Supports all 6500 Series Modules (supervisor engines, Fast Ethernet modules, WIC), 48 10/100/1000 Gigabit RJ-45 Ethernet ports.
3. Core features capability – ig., VPN, Firewall, IPSEC, Wireless, POE, Gigabit
4. Power Supply – ig., Optional internal AC or DC 1+1 hot-swappable power supplies, If none, just AC power, or DC power, etc.
5. Maximum Throughput – ig., 25Mbps with concurrent services, 350 Mbps with services such as security, mobility, WAN optimization, unified communications, video, and customized applications
6. Type of Layering supported – ig., Layer 2-4 switching
7. Weights and Dimensions – ig., 24 x 2 x 19 8lbs

Below is the requires list of products from Ciscos Website (These are the core products we need, if able to get ALL Cisco products with little effot please add to the list).

Routers:
Cisco 3900 Series Integrated Services Routers
Cisco 3800 Series Integrated Services Routers
Cisco 3200 Series Rugged Integrated Services Routers
Cisco 2900 Series Integrated Services Routers
Cisco 2800 Series Integrated Services Routers
Cisco 1900 Series Integrated Services Routers
Cisco 1800 Series Integrated Services Routers
Cisco 800 Series

Switches:
Cisco Catalyst 6500 Series Switches
Cisco Catalyst 4900 Series Switches
Cisco Nexus 7000 Series Switches
Cisco Nexus 5000 Series Switches
Cisco Nexus 4000 Series Switches
Cisco Nexus 2000 Series Fabric Extenders
Cisco Catalyst 4500 Series Switches
Cisco Catalyst 3750 Series Switches
Cisco Catalyst 3750-E Series Switches
Cisco Catalyst 3750-X Series Switches
Cisco Catalyst 3560 Series Switches
Cisco Catalyst 3560-E Series Switches
Cisco Catalyst 3560-X Series Switches
Cisco Catalyst 3550 Series Switches
Cisco Catalyst 2975 Series Switches
Cisco Catalyst 2960 Series Switches
Cisco Catalyst 2955 Series Switches
Cisco Catalyst 2950 Series Switches
Cisco Catalyst 2940 Series Switches
Cisco Catalyst 2360 Series Switches
Cisco Catalyst 2350 Series Switches

Security:
Cisco ASA 5500 Series Adaptive Security Appliances

Tags: , , , , , ,

Cisco, MCK, CITEL, Sonicwall, Extreme Board Level Repairs

We are a network reseller who is seeking an engineer skilled in doing board and component level repairs on switches, routers, and other networking gear.

Type of work ranges from simple-unsoldering/soldering out bad 25pin WAN ports with new ports, to more complex-testing and repairing bad components (flash/nvram/ports, resistors, etc.).

We deal primarily with Cisco, Sonicwall, Citel, and Extreme so experience in repairing devices is beneficial.

Additional work to be awarded if project is completed satisfactorily.

Tags: , , , , , ,

Mail Shot Design For CISCO Services

We are a CISCO partner providing product & services to Small – Medium Business our offering include
Network design and consulting
Firewall & Security
VPN & Mobility
Unified communication Systems & Telephony

We are looking for an Email shot which will be used to market our offerings to our target market

Tags: , , , , , ,

Cisco Configuration

I need someone to make me some simple configurations on cisco router 1941 / 1900 series.
Objectives.
Nat ports redirection
VPN user acounts creation.

Tags: ,

Cisco Configuration

I need someone to make me some simple configurations on cisco router 1941 / 1900 series.
Objectives.
Nat ports redirection
VPN user acounts creation.

Tags: ,

Fix Cisco 7965 Phone

I think I killed my phone while trying to install SIP firmware…i know people have fixed these phones…if you think you can fix it …i will pay you $40. It gives a black screen but i can see it requesting for DHCP

Tags: , , , , , , , , , , , , ,

Decryption Help For Cisco SSL VPN On UC500 Series

We are a call recording company attempting to record calls on a customer using an SSL VPN between a Cisco UC-560 and SPA525G phones.

To date we have been unable to successfully decrypt this network, although we have attempted to export the keys (we exported the default rsa keypair with the "crypto key export" commands) from the UC_560 and use the SSL decrytpion function in Wireshark with this keypair.

We need someone who has experience decrypting this kind of situation to help us. Please respond only if you have specific experience decrypting Cisco SSL VPN networks. Payment will be contingent on us solving this problem. Since we have very qualified personnel who understand Cisco very well on a generic basis. (See our engineers certifications below), you should have very specific experience with this type of problem.

Our staff certifications:
CCNA
CCNA Voice
Cisco Lifecycle Services for Advanced UC
UCAD
CCIE-RS
CCIE-Security-350-018
CCNP Voice

This project is then to do one or more of the following:

1) Tell us the specific steps required to decrypt this network. If you know the answer, tell us and we will pay based on successful decryption;
2) Provide us with or point us to tools – either open source or low cost or that you have available – to diagnose the decryption failure. These tools must be able to distinguish between a failure based on the wrong key, some deviation in the SSL protocol or other potential failure in the decryption process
3) Provide other steps that will lead to successful decryption of the network.

In your response, please describe your qualifications to help with this project.

Tags: , , , , , , , , , , , , , , , ,

Cisco Server Assistance

NO PMs please. Just bid, when Im interested, I shall contact you. Thanks

Tags: , , , , , , , , , , , , ,

CLIP Cisco AS5400HPX

I have CiscoAS5400HPX, terminate calls via E1s to UK-mobile
calls originate from landline international.
BT is my E1 provider.
BT enabled CLIP but still showing E1 DID instead of International CLI.
if I enable CLIR then it work okay and shows as unknown number
But when enable CLIP then only show E1 DID instead of caller number CLI

Tags: , , , , , , , , , , , , , , ,

CCNA Study Guide 640-802

Cisco CCNA study guide we need someone to create a study guide coverining all aspects of the ccna study guide. There is many examples on the internet like trainingmajic semsim and countless others this should be about 60 pages with terminology, diagrams, explanations and commands used in the cisco ccna test. Your job is to produce a professional looking study guide based on the materail all ready out there without copying them word for word no cutting and pasting form other sources if copy righted. Pnly 10 font with little spacing and only half inchh margins

Tags: , , , , , , , , , , , , , ,

Config Cisco SIP 7970 For Asterisk / FreePBX

I have my Cisco SIP phone talking to a TFTP server and it will pull down configuration files. That part works fine.

I Need all that actual configuration files written for Cisco 7970 SIP Phone to work with my AsteriskNow PBX and need configuration details settings on FreePBX end. The system needs to then be tested.

I only have config files obtained by a cut-n-paste from various forums. I need someone truly experienced with this specific dynamic of a SIP Cisco and Asterisk/FreePBX.

I would like clean files with as little extraneous lines as possible.

The phone needs to have all the standard features working.

The

Tags: , , , , , , , , , , , , , , , ,

Power Point Slides For Cisco CCNA

Using Todd lammle book for ccna create about 1200 powerpoint slides with diagrams

Tags: , , , , , , , , , , , , , , ,

Cisco Assistance Required

Need assistance configuring a Cisco 877W Device with Wireless and Voip

Tags: , , , , , , , , , , , ,

Vyatta Configuration – Migrate From Cisco 3640

This project will require two stages

Stage 1 – Migration from Cisco 3640 router to Vyatta

We require someone who is familiar with Vyatta or other routing software to handle setting up a router that is going to have one /22 and two /20s. The network operates as a simple single subnet, so it is not a complicated setup. Requires BGP. I currently have the following for the router specs:

Dual Core Xeon X3330
4GB RAM
Sata HDD
Dual Nic
Supermicro board

In addition to the routing, it needs to have a VPN setup for Stage 2.

The current router in production is a Cisco 3640. When the Vyatta router is ready, we will then switch it over live. This Cisco 3640 is then decommissioned and the Vyatta will be in production. This needs to be done asap.

Stage 2 – VPN Link Second Vyatta

I also have the hardware for a second Vyatta router with identical specs that will need the exact same config.

This second router will later be going into a second location. When the AN numbers are broadcasted from the two locations, the VPN between the two routers will determine which network has which IPs live and where to send them.

This setup will only be for a temporary period during a migration of data between the two locations. Once all the data is migrated from the 1st location to the 2nd location, then the 1st router can go offline, and later be moved to the 2nd location as a backup router and/or serve other network functions like firewall or basic ddos protection.

This stage will be done sometime in February 2011.

I would like to find a freelancer that can take care of all of this, and I can also pay for future work for occasional work on things like doing updates, or when we might have changes to our network config. I am sure if you get this work done we can negotiate something for the future. Basically looking for a long term relationship.

Looking forward to working with the successful freelancer

PS: If you know a better solution to use other than Vyatta for a small hosting companies router, we welcome other recommendations.

Tags: , , , , , , , , , , , , , , , ,

Cacti Server Setup With Cisco Switch And Firewall

Looking for someone to setup Cacti to monitor a cisco switch and firewall.

The server is already setup with Windows 2008 and IIS/PHP

would like to have someone that is available to start right away.

Tags: , , , , , , , , , , , , , , , ,

Trixbox Cisco Handset 9951 Intergration

We need to intergrate the Cisco 9951 and 7931 handsets directly into endpoint manager in Trixbox. Project requires member to source requirements and intergrate with this platform.

Tags: , , , , , , , , , , , , , ,

I Need A Technical Document About Cisco Switch Configuration

I need a technical document about Basic Cisco Switch configuration. The document should be highly technical around configuring various basic features of Cisco switches using the Command Line Interface (CLI). Therefore, the writer MUST be highly experienced on Cisco switches and be able to write accurate and working configurations which are tested in real life installations.

Experience with Cisco switches (Layer 2 and Layer3) is required.

The following topics must be discussed in the document.

— Basic Cisco Switch Theory
— How to configure switch management
— How to configure vlan 1 for management
— How to configure ip default gateway
— How to configure vty lines security
— How to configure basic interface commands (duplex, speed, shut, no shut etc)
— How to configure vlans
— How to assign ports to vlans
— How to configure trunk ports
— Basic troubleshooting commands
— How to Backup configuration
— Upgrading the switch software

The topics above must be described in brief and then technical configuration should be provided. Diagrams should be also used to better describe the topics above.

The technical document should be around 20-30 pages.

No copy/paste from Cisco website or other Cisco sites. In addition to configuration samples, you are required also to provide technical explanations of how the configurations work.

Absolutely no plagiarism will be accepted.

As Im a Cisco professional myself, I will personally review the document and deny payment if the information is not accurate or complete.

Please do not bid if you are not confident with this project.

Tags: , , , , , ,

I Need An Ebook Written About The Cisco 800 Series Routers

I need a Cisco expert on 800 series routers to write an ebook for me about the Cisco 800 series router configuration. The ebook should be highly technical around configuring various features and functions on the Cisco 800 router using the Command Line Interface (CLI). Therefore, the writer MUST be highly experienced on Cisco routers and be able to write accurate and working configurations which are tested in real life installations.

Experience with the Cisco 800 series routers is required.

I will provide the Chapters and Section topics of the ebook, and you are required to expand them with configuration details and explanations.

Some Chapter examples:

— Basic Cisco 800 router configuration
— Configuring DSL using PPPoE
— Configuring NAT
— Configuring Access Lists and Firewall
— Configuring IPSEc VPN
— etc

Diagrams should be also used to better describe the topics and scenarios.

The Ebook should be around 13000-15000 words (Around 70-80 pages).

No copy/paste from Cisco website or other Cisco sites. In addition to configuration samples, you are required also to provide technical explanations of how the configurations work.

Absolutely no plagiarism will be accepted.

As Im a Cisco professional myself, I will personally review the ebook and deny payment if the information is not accurate or complete.

Please do not bid if you are not confident for this project.

Tags: , , , , , , , , , , , , , , , ,

Cisco Firewall Config For Trixbox With QoS

Looking for help to correclty configure 871 router for Trixbox with one or two SIP trunks. Current single trunk config works but just really looking for a little help from a Cisco/Asterisk VoIP Guru thats been here before (hundreds of times!)

Tags: , , , , , , , , , , , , , , , ,

Network Setup And Misc Cisco Items

Network setup and misc cisco items, Linux email server rounting. If you know your stuff this could build into a Job relationship.

Tags: , , , , , , , , , , , , , , ,

Configure A Site-site VPN Between A Cisco ASA5540 And Centos

I have set up openswan i need to configure an IPSEC site-site VPN between a cisco ASA5540 and Centos using openswan the tunnel is up but i cannot ping so the job is to help me do the routing.

Tags: , , , , , , , , , , , , , , , ,

Active Directory ,storage Box Testing,handling Network Issus

I am looking for any kind if support project ,in linux platform of handling administration issues,cisco platform, and Microsoft in active directory, and storage box testing.

as basically i am an IMS guy looking not towards programming completely,and ready to take up in cisco for the support of routing protocols support and switches support basically l2 and l3 switches .
and an kind of project windows ADS in 2003 and 2k8 also.

Tags: , , , , , , , , , , , , , , , ,

Fix Cisco 7970 Phone

I think I killed my phone while trying to install SIP firmware…i know people have fixed these phones…if you think you can fix it …i will pay you $50.

Tags: , , , , , , , , , , , , ,

Cisco ASA 5505 Setup For Site-to-Site VPN And RAS VPN

Small enterprise is looking for a skilled technician / CISCO Engineer who is able to connect to configure two ASA 5505 for site-to-site VPN connection and RAS Dial-in.

The small-sized business owns a server in a datacenter and would like to establish a permanent connection between the main office and the datacenter. In addition, 5 notebook users need to be able to connect to the datacenter and the main office by using the Cisco VPN Client.

This is a small and straightforward project with possible follow-up work later on.

Tags: , , , , , , , , , , , , , , , ,

Cisco Expert Needed (preferably Ccna, Ccnp Certified)

I need a Cisco expert (preferably ccna or ccnp certified) to write content for my Cisco related websites. I

Tags: , , , , , , , , , , , , , , , ,

Trixbox And A2 Billing

Hi There,

This is the 2nd time I have to publish the project as engineer got too busy with his work. We have almost ready Trixbox, a2billing ready just need some fixing work.

What I want – 1. Create extension which will be use on cisco handsets and will be authenticated with a2 billing. 2. Before providing with the call itll verify how much credit user got. 3. At start prepaid cash or PayPal integration and later may be voice payment.3. On admin panel we will set resellers account then reseller can manage all payments for their clients.

We do lots of cisco/ sip stuffs everyday so dont need any help, just to make to sure its working a2billing thats all.

Plan we will add different sip trunk for cheaper route, Trixbox/ a2billing should find cheapest route to make calls.

I have explain a lot but this not that big job I believe, please no newbie.. someone who done this before or handling it everyday life would be better person. As we may need more help for further cutomisation.

budget – $50

Tags: , , , , , , , , , , , , , , , ,

Cisco CCNA Instructors Needed

Training company is seeking individuals to teach online instructor Led CCNA related courses (course listing below) on a Contractor basis. The courses will be delivered via a commercially available collaboration tool, such as Webex, and be delivered in 6, two hour sessions over a 3 week period. Past experience teaching similar material is required. In addition to instructing the course you will also be responsible for preparing the presentation slides (PowerPoint is fine). In order to be considered, please send the following information:

1. Resume
2. Training experience
3. Availability during normal work hours
4. Example of Cisco course materials you taught or prepared

Courses to be taught to include:
Interconnecting Cisco Network Devices Part 1
Interconnecting Cisco Network Devices Part 2
Implementing Cisco IOS Network Security 1.0
Implementing Cisco IOS Unified Communications OR Cisco Voice over IP 6.0
Implementing Cisco Unified Wireless Networking Essentials 1.0

Tags: , , , , , , , , , , , , , , , ,

Need Help Configuring Cisco ASA5505 Firewall

I have a webserver at my office that has been configured. IT is running Linux Centos. It is working great, but I am having some issues with configuring the static public ips. I have 5 static IP addresses.

On the server, the ip that is assigned is 172.11.x.xx. I have the public ip 75.146.xxx.xx xport forwarding to that ip. Everything is working fine except for emails going into spam because it is sending from the local ip address. The website running on the system is tekrevival.com.

I need someone that is a high level cisco tech to configure my firewall to assign the public ip to the nic card on the server. Is there a way to configure the asa5505 to assign the public ip to that server?

Please only apply if you are cisco certified hi level.

Tags: , , , , , , , , , , , , , , , ,