Posts Tagged cpu

Optimize WordPress To Load Faster

I have a WordPress website and it is working well but the server speed is very slow. I spoke with the web host and they told me that the server it is on, which is a VPS, is running fine and that the reason the server is slow is because of the CPU drain that our WordPress site is placing on their servers. I need someone to tweak the settins so that we get faster performance. I already installed WP Cache and that is not solving the problem.

They web host gave the following report / explanation, and I need someone to fix this as soon as possible:

Your WordPress site still consumes much CPU causing slowness on the VPS as you could check via SSH access or under Resources menu in Virtuozzo control panel. You should optimize your application in order to reduce load on the VPS.

Slowness on the VPS is caused by high CPU usage of PHP processes:

top – 18:12:44 up 1 day, 6:43, 0 users, load average: 10.01, 9.80, 8.88
Tasks: 51 total, 9 running, 42 sleeping, 0 stopped, 0 zombie
Cpu(s): 62.2%us, 15.2%sy, 0.0%ni, 22.3%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 4190208k total, 457700k used, 3732508k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached

9521 theiphon 16 0 170m 41m 24m R 3.7 1.0 0:00.40 php
9588 theiphon 16 0 169m 40m 24m R 3.4 1.0 0:00.36 php
9563 theiphon 16 0 169m 40m 24m R 3.3 1.0 0:00.35 php
9526 theiphon 15 0 168m 39m 23m R 2.7 1.0 0:00.32 php
9592 theiphon 16 0 159m 32m 23m R 2.3 0.8 0:00.24 php

You should optimize your application in order to reduce load on the VPS. You could refer to the following article or contact wordpress support/community for more info:

Tags: , , , , , , , , , , , , , , , ,

Write A Multi Cycle CPU Simulator Using VHDL

Write a multi cycle CPU(MIPS) simulator using VHDL

Use VHDL to simulate the multi cycle CPU

There are about 60 MIPS instruction should be implemented

The project must be finished before 15/4

Tags: , , , , , , , , , , , , , , , ,

Low Cost Linux NetBook

Hello, and thank you.

We are seeking a partner to help us source a low cost netbook that runs a full linux OS. The target cost is $100 or lower.

The specs needed are already found in another product. They are displayed here:

(We may need to make minor adjustments to the design e.g. upgrade the CPU to the same one to the 833mhz Samsung S5PC100. This CPU takes DDR2 RAM rather than the slower DDR1 memory which will bring down the costs and improve system performance).

However, the product above violates the GPL licence and thus dealing with it may result in copyright issues.

We are looking for a partner to help us build OR source a similar device. If need be, we will provide our own custom Linux distribution to work with this machine.

Kindly note that we welcome any other low cost full linux laptops that you may have in mind. The only "must have" feature is:
-3G modem with integrated SIM card slot
-Cost should be as close to $100 as possible

Please note that the price you quote on this project is not the one we shall use if we agree – we will likely change the price as we come to an agreement.

Tags: , , , , , ,

Overloading Website (CPU Load / Apache Too High) WordPress

The problem:

* Intermittent database error such as "Error establishing a database connection" even with the proper settings on all PHP files.
* Apache Server / MySQL database soars too high flooding the CPU and Memory making the website impossible to load. Thus, crashing the whole site.
* Bloated MYSQL database that needs to be optimize accordingly.

Steps already done to solve the problem

* APC Set-up
* fully installed W3-Total Cache and configure it to APC. Tweaked it multiple times.
* Tweaked Apache server configuration settings

Weve also hired a Freelancer before and do this:

1. Sysctl (/etc/sysctl.conf)
2. filesystem (/etc/fstab, noatime)
3. mysql server settings
4. apache settings (for worker mpm, # worker MPM section in apache conf), APC settings.
5. software raid-1

But after a couple of weeks, the problem is back again.

What we need:

*We need a specialist who has years of experience on tweaking, optimizing MYSQL database and configuring Apache server at the same time.

*You need to decipher whats the cause of this problem and solve it. Including accessing our wordpress panels, tweaking the plugins, themes, etc. Accessing / tweaking our database queries, and configuring our Apache server to solve this issue.

You may also be required to perform security check to see if there are any known hijack / virus / injection done on these wordpress files and its database.

You will be contacted on Skype / Yahoo Messenger and you need to be present when we do so.

Also, you need to be aware that there are times the problem will subside then rise up on a certain time of the day. You need to be present at that specific moment so you can see the problem and fix it. Preferably, on the first 24 hours upon beginning of this task.

Type of Server:

Quad Core Intel(R) Xeon(R) CPU X3470 @ 2.93GHz

Payment will only happen once we are sure the problem is fixed (after 3-4 days of not seeing any error connections)
Well give root server access for very experienced workers w/ a good reputation.

Tags: , , , , , ,



I have search engine script that bring result from bing and yahoo. Only keyword suggestion is in mysql when people type a word it will update keyword suggestion db if keyword have query sometimes is update sometimes is query condition mysql (currently 10k user 25k pages)
i don

Tags: , , , , , ,

Mysql Optimization Professional Wanted

I have search engine script that bring result from bing and yahoo. Only keyword suggestion is in mysql when people type a word it will update keyword suggestion db if keyword have query sometimes is update sometimes is query condition mysql (currently 10k user 25k pages)
i don

Tags: , , , , , ,

Website Uses Too Much CPU

Web portal uses too much CPU. This site is based on Joomla and template from Joomlart.

Initial problem of the site is that CPU usage and loading time.

The site is on VPS hosting.

Tags: , , , ,

Actuate – Performance Issue


We are using actuate ASP 8 for reporting tool connected to our web application. We are having issues with CPU utilization. How to control CPU utilization per instance space for,
view service & factory service of Actuate.

Tags: , , , , , , , , , , , , , , , ,

Upgrade Plesk On Fasthosts Server From Vs 9 To 10

We have a Fasthosts DS500 dedicated server. I tried to update the Plesk software on it using the update option in the Plesk control panel and it worked on some parts but not on others. As a result, some of the functions on the control panel such as add domain are producing SQL error messages. We need someone to jump onto the box for us and sort this issue out and upgrade it to the latest version. The Plesk tec info is below:

Parallels Plesk Panel version 9.2.2
Operating system Linux 2.6.18-128.el5
CPU Genuine Intel, Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz

The OS etc underneath is working fine as are web sites and mail but the admin interface for Plesk is not hence us needing the assistance. We have full root access to the box etc.

Tags: , , , , , , , , , , , , , , , ,

Intel CPU Supplier Sourcing 1

Dear All,

We look for a list of potentiel Intel CPU suppliers , you must be able to make quote (on behalf of these suppliers) for the following products:

The suppliers must be approved by Intel to resell there product, we accept only new Intel CPU suppliers, and should be first class supplier (should have the best prices).
We are located in Algeria

Tags: , , , , , , , , , , , , , , ,

Need Sql Expert To Optimize Server.

We have a ongoing project that requires a lot of sql and cpu usage. I am seeking a programmer or sql expert to make some tweak the server and make some recommendations to improve growing databases over time.

The site is a ad network and it stores traffic data for each website our ads are located on. When its not storing this data in the database table which is not about 10 million records, its also fetching ads from another table which is about 500,000+.

when the site gets too many request the cpu loads up and everything starts to crash. I am seeking a fixable solution to manage this growing problem and still maintain stability in add fetches, storing and updating a large database.

The other issue is the table with 10million, we have to updating all the click traffic so that its update other tables to show reports for users. I think now that its so big, its not getting to all the clicks and therefore not updating everything.

is there a limit to how many records can be updating in one sequence.

here are my server details.

* Intel Dual Xeon SuperMicro Server
* 1 Xeon CPU Core
* 2048MB Guaranteed Memory
* 100GB RAID-10 Disk Space
* 3000GB Premium Transfer
* R1Soft CDP Daily Backups
* 8 Dedicated IP Addresses

Also Here is my current load via apache status

Current Time: Monday, 31-Jan-2011 11:30:10 CST
Restart Time: Sunday, 30-Jan-2011 22:23:10 CST
Parent Server Generation: 10
Server uptime: 13 hours 7 minutes
Total accesses: 137882 – Total Traffic: 393.5 MB
CPU Usage: u143.48 s2210.17 cu1.37 cs.03 – 4.99% CPU load
2.92 requests/sec – 8.5 kB/second – 2992 B/request
72 requests currently being processed, 4 idle servers

This project is to optimize or tweak the server and provide me a simple solution or idea to manage its growth.

Tags: , , , , , , , , , , , , , , , ,

Magento CPU Ovrlod Cron Nginx-memcache-eAcclr8tor-spawn-fcgi

We are implementing Magento. We have both a development site and production site (not yet live) on a cloud server with a 4 cores and 8GB ram. Therefore, there is NO traffic.



We have had an ongoing cpu overload problem that needs to be fixed.

When running only Apache…no problem, just too slow. Lightspeed is too slow due to the number of skus and modules we have added.

When we switch to nginx, memcache, (any php accelerator) and spawn-fcgi [ I will call this arrangement "the juice" throughout the rest of this post ], we start getting cpu loads that I have seen climb anywhere between 30-70 in top. Craaaazy!!

Recently, we turned the juice back on after having it off for a while during further development. After turning cron back on in cPanel for the development site all looked good with exception of a nice, even spike that increased from a cpu load of zero up to 4 starting at 4am, peaked at 4:30am, and then back down by 5am. After adding our cron job in cPanel for the production site, we still had the same spike at the same time, except that it rose to a cpu load of about 5.5, now running two crons for the two sites.

We also have a script that runs using cron on the dev site that is essentially just a crawling script that is designed to cache about 1500 URLs to reduce page-load times.

What is interesting is that after more than a week of "stable" conditions with exception of the 4am spike, our sys admin put a simple reporting script in place to try to determine what was causing the 4am spike. The next 4am resulted in a spike load of about 11 for 3 hours that then fluctuated between 8.5-9.5 for the next 27 hours before we killed all php.

So we removed the script designed to identify the 4am spike and restarted both sites. The cron daemon was off. I restarted cron daemon without the script and within 1 hour, we were right back up to a cpu load of 8-9.

The other issue is that we have had issues getting the server optimized for Magento. We get category pages that do not consistently load fast. We have seen times when they load between 2.5-4.5 seconds and lately they load between 4.5-11 seconds. Product pages typically remain more consistent between 4.5-6.5 seconds.

If you have seen this before and you confidently believe you can fix this issue, please get involved. If not, thank you for taking the time to read this post.

Tags: , , , , , , , , , , , , , , , ,

HP Original Toner Supplier Sourcing

Dear All,

We look for a list of potentiel Intel CPU suppliers , you must be able to make quote (on behalf of these suppliers) for the following products:

The suppliers must be approved by Intel to resell there product, we accept only new Intel CPU suppliers, and should be first class supplier (should have the best prices).
We are located in Algeria

Tags: , , , , , , , , , , , , , , , ,

Web Service That Collects End User HW Config And WEI

The focus of this project is the technology, i.e. get it to work. Only the simplest graphic design needed to show functionality is required.

I want a web site running on the web hotel that automatically (as far as possible) collects end users HW config and WEI (Windows Experience Index).

A user who has registered and provided his HW data is qualified to search/browse HW data for all other reported systems.

The collected data should be browsable for qualified users by make/model of computer and CPU, as well as WEI. All collected information on a specific system shall be displayed when it is selected from the browsing tree/catalog or search results.

It is important that the php code and mySQL data base are well documented for further development.

A user should be able to report data from more than one computer.

Information to be collected and stored:

– computer manufacturer
– computer model
– computer manufacturers partnumber or equivalent
– CPU manufacturer
– CPU model
– CPU clock speed
– FSB speed
– Installed RAM
– max RAM
– Graphics adapter manufacturer
– Graphics adapter model
– Graphics adapter manufacturers partnumber or equivalent
– Graphics adapter video memory
– Graphics adapter supports Direct3D 9, DirectX 9, and WDDM 9 y/n (for each)?
– Hard disk size
– Hard disk bandwidth (if possible)
– Hard disk type (IDE/ATA…)
– laptop/stationary…
– monitor size
– Windows Experience Index and subindecies (manually entered if necessary)

The website should be written in css/html/php, and use a MySQL database. I guess an activeX control or java-something will be needed too for the info collection.

As much as possible of the data collection should be done without user interaction, but if a discrepancy is found when comparing manufacturer partnumber to an already registered system the user should be asked if the scanned/reported data really is accurate. Any user-entered data should be "spell checked" against the data base in order to maintain data integrity.

The purpose of the site is to build a data base of WEI for computers systems of different kinds.

Any text that the user sees must be stored separately so it can be translated in to other languages.

Tags: , , , , , , , , , , , , , , , ,

New Scheduler For The Linux Kernel – Per-user CPU-limits

Hello, I need a new linux kernel scheduler that limits CPU usage per user.
For instance, I want to be able to say that no user should be able to use more then 50% CPU.
It should work for the centos5 SMP kernel (2.6.18).

Tags: , , , , , , , , , , , , , , , ,

Fix Sever Overload

TASK: Fix the overload of the server.

It is a Vbulletin Board.

The server is overloading in the last time but its the same amount of users like when it was all good.
it was before a dual core . we have moved 2 weeks ago to a quad core cpu serever, but its still overloading.
we dont know what could be the reason or what script or whatever is causing theoverloading.

Overload graph :
at this graph you can see the overload . i have made a test and "closed" the board for some minits (between 10pm you can see the lower cpu usage but anyway its still high with 70-80%).

server details:
quad core cpu with 4gb ram,
avarage server load (evenings): 2.5 – 4.0

info: I cant give access to the server. you have to guide me or so.

Tags: , , , , , , , , , , , , , , , ,

Need Cacti Monitoring Installed And Configured

I need Cacti monitoring installed and configured to display the following:
– CPU percent usage
– CPU load
– Bandwidth
– Memory
– Disk space

My managed hosting said they installed it, but I think some dependencies were not, so technically its not completely installed. But it does look like some of the work has already been done.

Im running CentOS 5, with WHM/cPanel.

Tags: , , , , , , , , , , , , , ,

Diablo 2 Cpu Reducer Compatibility

Hello, Im in need of a programmer to make an already made program compatible and usable for Windows 7. The program that i have is a cpu reducer for diablo 2 that reduces the cpu and memory usage of the game, however it was designed only compatible for windows xp and i have gotten a new computer that is on windows 7 and it does not work with it.

Im looking for someone who speaks english, has done projects for games/diablo 2 before and is active so we can communicate fast so the project can be done as soon as possible.

Message me if you have any questions, upon selecting the provider, i will send you the rar file of the cpu reducer.

Tags: , , , , , , , , , , , , , , , ,

Automatic CPU Limitng Script (CentOS-OpenVZ)

Were looking for someone experienced in CentOS Linux and OpenVZ virtualization to write up a program/script (possibly using cpulimit) that will very simply:

1. Flag (And log if possible) any processes using over an X% of the CPU
2. Then, automatically throttle that cpu to X%

Preferably, something that can easily be configured with a few edits to a config file.

It should be a simple bash shell script that runs every few minutes through a cron job.

Tags: , , , , , , , , , , , , , , , ,

Diablo 2 Lord Of Destruction CPU Reducer

Iam in need of a program that reduces the cpu usage by the game diablo 2 made by blizzard.

2 Things can be done:

1. Modifiy the program i already have that reduces cpu usage (reduce it even more)
2. Create a new program that will reduce cpu a lot more than my current program

Current iam able to run 30 d2s with the private program that i have with lag most of the time
I need to be able to run 75+ d2s effectively without any lag.

*Do not bid on this project if you are not going to respond fast*

Tags: , , , , , , , , , , , , , , , ,

Joomla Web Site Code Debug And Optimization

Recently we have created a site for a NGO on Joomla. In order to meet all the requirements our client had, we filled the site with many modules, components and plugins that appeared to have made a big problem. Web Site is being updated several times a day and the amount of information posted is very big (text, videos, audio). Besides that it has normal amount of daily visits. Thus the web page has a very high CPU load from time to time freezing it completely. Sometimes it is even down for some period of time (500 Internal Server Error). Generally, during the access it takes long to make a full load. CPU load issue makes other problems regarding hosting companies that are having restrictions on shared servers demanding the site transfer to VPS or Dedicated servers that is not cost effective. In our case we think that the problem could be solved by bumming and optimizing the code completely and that service I need for the site.

1. Making diagnose of the problem;
2. Making changes in code in order to faster up the site and deal with CPU load.
3. Give a testing period for a month in order to solve any other problems that will incur due to changes in code.
4. Give guarantee that the problems will be solved.

Tags: , , , , , , , , , , , , , , , ,

Finalize My Directshow Project.

I have an application that takes an mpeg2 stream and converts it to windows media stream and pushes it to windows media services. I need it to be completed in the following ways. All the issues are in order of importance.

I need #1 to be done immediately. The others we can work together to figure out how to best solve them.

This #1 issue is urgent and needs to be resolved YESTERDAY.

#1 issue is that the source some times stops, and the encoding stops as well, but my encoding executable still thinks that its running. It doesnt stop, BUT, the CPU drops to 0%. Either fix it that it doesnt ever stall and drop to 0% and or add a watch service that can detect the process has stopped or 0% cpu and restart it.

#2 issue is that I need to receive the stream in rtp:// format. Right now I am receiving my source in rtp:// and converting it to http:// with vlc. Either find or create a direct show filter that can take this or embed vlc into the application so that it is invisible and use vlc to receiving the stream and change it over to http:// I also want to be able to set any input streaming format as a source. Udp rtsp and in any format h.264, flash, anything that can stream video as a source.

#3 the mpeg2 splitter by gabest is the most widely used mpeg2 direct show splitter. It is flawed. I find that the splitter can only work for about 2 hours before crashing. I changed over the haali media splitter and I can get about 5 hours before crashing. Either make a new splitter, find one that works, or make the haali one work.

#4 there is a cpu issue, for some reason the last developer that was working on my code, had made changes and now each encoding process takes up too much cpu to take a simple 720X480 stream and convert it to wmv. I have been forced to change the output resolution to 320×240 so that I can achieve more then one encoding process.

#5 there is no gui for this application. I would like you to make one.

#6 ffdshow options. Since ffdshow filters can be added to the video and audio streams, I would like this to be added to the gui where the user can add and remove options for each process that is active.

This application is meant to run 24 hours a day 7 days a week. If the application crashes and can not restart it self, I want it to email me or what ever email address I specified.

I expect to talk to you via gmail chat or skype chat on a daily basis.

If you can fix my #1 issue before Monday, you will be the winner of the project.


Tags: , , , , , , , , , , , , , , , ,

PHP Code Optimization And Enhancement

Hey Guys,

I have a PHP script that scraps some sort of information (I will be more clear in PMs)… the scripts require crons to run and come of them to run every minute. the problem is: the source code is written in a way that is VERY VERY much CPU intensive, I have it of Dual Xeons and 12 gigs of RAM dedicated server and they take the CPU up to 11 !!! the CPU should be at 0.5 MAX. they do a lot of HOLD to the MySql requests.

I will provide the Source code, and the DB Structure, and I will provide a screen shot of the Crons running (the times of the crons)

I want you to tell me what can you do to optimize the code? and if I asked to add more services to scrape, will you be able to do it?

Main aim of the project is: OPTIMIZATION. I will only release the funds from Escrow after making sure that it has been optimized on my server.


Tags: , , , , , , , , , , , , , , , ,

Diablo 2 Cpu Reducer

Iam in need of a program that reduces the cpu usage by the game diablo 2 made by blizzard.

2 Things can be done:

1. Modifiy the program i already have that reduces cpu usage (reduce it even more)
2. Create a new program that will reduce cpu usage by blizzard.

Current iam able to run 30 d2s with the private program that i have with lag most of the time
I need to be able to run 75+ d2s effectively without any lag.

*Listings, bid on this project, when you retracted on the other one i cant message you anymore.

Tags: , , , , , , , , , , , , , , , ,

WordPress – Nginx – Linode CPU Load And Speed Optimization

You should have previously worked on large wordpress nginx sites hosted at
Should have experimented with various techniques to optimize the site for better performance in terms of:
1. Good pageload speed.
2. Less CPU usage
3. Optimum use of servers resources to gain maximum visitors.

Site to work on:
Its a wordpress site receiving around 3000 uniques and double the pageviews. So its not a very big site but still it uses a considerable amount of server resources.

Your work is to:
Work on various settings of the nginx and wordpress to enable wordpress to perform the best.
Work on the code to reduce queries whereever possible to enable fast loading and less CPU usage.
Optimize mysql tables or structure to reduce CPU usage and optimize performance.

Will be giving this project to only those who have lots of experience in this and will explain a point to point plan on how they will go about this.

Tags: , , , , , , , , , , , , , , , ,

*Highly* Skilled PERL (and Mysql) Coder Needed

This job requires in-depth knowledge of Perl and MySQL, specifically with regards to:

*extreme* speed in processing strings coming in from a File::Tail process (I can currently process about 5k per second, but need to get it to 30k or so).
In-depth knowledge of DBI (for mysql).
MySQL query analysis – am I using the best queries for the best performance?

The script is an existing script that I need some help on for performance improvements.
Its currently ~600 lines and processes incoming messages to match a regex. If theres a match, some db selects are done as well as comparisons with other table rows followed by updates or deletes.
In addition to all this, theres a load data infile call that loads everything into mysql after a specified amount of time or number of messages.

The current script can do around 5k messages per second (mps) but stays around 90% cpu until the mysql load data pops, then mysql eats ~95% cpu. Once mysql is done, my script spikes up again.
The script does not do any forking currently (it did, but I removed it because it didnt work with my latest additions) so I would like someone that can do something like POE::Component::PreforkDispatch (just an idea, not a requirement)

– Scale beyond 15kmps (would prefer 30kmps if possible)
– Lower CPU/Mem utilization as much as possible

If the scale requirements simply *cant* be accomplished, I would like any creative recommendations to address it.

I am very detail oriented and I expect the bid winner to be the same.
If youre trying to learn and need a challenge, please do not bid on this project. Im pretty good with Perl/PHP/MySQL, etc. and I need someone that knows more than I do 🙂

We can meet via WebEx and Ill be happy to get you familiarized with my project.
I have a dev server available with full ssh access – all I need is someone smarter than me (and Im sure there are plenty :-))

Tags: , , , , , , , , , , , , , , , ,

Research CPU

Need a spreadsheet of CPU thread capacities from Intel and AMD (x86) up to and including new i7Extreme (12 threads).

Listed by manufacturer, model, socket type, threadcount, cores

Thats it.

Prefer xls format but you can use googledoc if necessary or open office.

Tags: , , , , , , , , , , ,

Detection Tool [WITHOUT WMI]

We are a team of software developers that need to outsource little portions of our work because of work overload

simply we need a tool [With Source Code] that can detect the following information from the machine that the tool is installed on (DO NOT USE WMI .. WMI SOLUTIONS ARE NOT ACCEPTABLE) :-

1. System Manufacture
2. System Version
3. Motherboard Manufacture
4. Motherboard Chipset
5. CPU Type
6. CPU Speed
7. RAM slots (what is in what slot)
8. RAM Speed
9. HDD Temp Sensor
10. CPU Temp Sensor

it can be written in any language .. but should have an interface so we can use it in .NET
Again .. if you are going to use WMI to get this information please dont bid .. we need a tool which can get this information on its own .. write wmi not allowed in your bid so i can know that you read details

please bid only if you already know how to do this as it is required urgently .. we dont want a bidder who will learn how to do it

if you did a great job .. there is a near sure chance that you will take responsibility for most of our outsourced work

for all losers out there that only need to get money for nothing .. we are developers and we know what you are doing and if we had enough time we would have already developed this solution .. please do not bother and go rob some one elses money

for all serious and professional developers .. we are more than happy to build a long business relationship with you .

happy bidding

Tags: , , , , , , , , , , , , , , , ,

WordPress Database Optimization

Hi ,

I am having problems with my dedicated host serving a wordpress blog. I see that the CPU utilization is very high and it is impact my ability to serve pages on my website.

Am currently using a wordpress 2.9.1 with more than 20k blog posts on a dedicated server and would like to consult some database experts who can help me to optimize the wordpress tables so that we have lesser CPU utilization. I am already using WP-Super Cache to improve my CPU utilization.

Would be looking at some concrete suggestions on how to optimize wordpress so that CPU utilization comes down. Am curently runningon Intel Xeon 3360 2.8 GHz Quad Core Processor WITH 2GB of RAM and having around 15k vistors/day.

Tags: , , , , , ,

Index Page Taking Too Much CPU

The index page of my website is taking too much CPU of the server that is why my account got suspended.
The website is joomla driven. So Id like someone who can fix this issue in a real short time, I need my website back up as soon as possible.


Tags: , , , , ,

Help With Dragon Naturally Speaking Set Up On 64 Bit Cpu

Need someone who is familiar with Dragon Naturally Speaking to use team veiwer and set it up for me..i have instructions and have downloaded..i just dont know how to use it on 64 bit .. or if you can make my computer capatible with 32 bit..

I will pay 3 dollars an hour..

Tags: , , , ,