Posts Tagged hardware

Twitter Content On Open Source Hardware & Electronics

We need someone to create a bunch of open source hardware and electronics related twitter content. We are looking for at least 300 tweets, but would take as many as we can get. Open source hardware (#OSHW) is a lot like open source software except the focus is on building circuit boards and electronics rather than on writing code. See the following links for more info.

http://en.wikipedia.org/wiki/Open-source_hardware
http://harkopen.com/open-source-hardware
http://www.arduino.cc/
http://www.opencollector.org/Whyfree/

The following is a list of content sources to start with.

makezine.com
hackaday.com
www.inmojo.com
harkopen.com

We would like the content in a text file, with 1 tweet per line. common hash tags are as follows.

#OSHW
#openhardware
#Arduino

our twitter feed: http://twitter.com/upverter other popular feeds are as follows.

@make
@adafruit
@solarbotics
@CLElectronics

Tags: , , , , , , , , , , , , , , , ,

IPTV (STB) Programming

Hello to all developers,

I need a developer who can develop a firmware for set top box and servers for an IPTV , which is a home entertainment system that can be used to broadcast TV channels from a setilite platform and Video On Demand, Movies streaming, and etc.

The project is very simple, the developer must be able to work on this project within a good time frame also he must be able to recomend the hardware needed.all the hardware would be provided / already available.The potential developer must be able to install all the neccesary programs that will make iptv works
* The fee is negotiable
* Average English

Please open the attachment for more details.

Thank you for your time,

Regards,
Ambose

Tags: , , , , , , , , , , , , , , , ,

Verifone Or Ingenico Wireless Modification (Dummy)

Need someone who can modify a Verifone VX670 wireless pin pad, so that it will record track 2 and pin for debit, cc transactions. Need to print out receipt and need to have a menu for Debit and Credit which if it chip card will ask you to insert card.

This will be a dummy machine, if you know what that means, and so if you can do this software modification with another pin pad model or brand, then I am also interested.

You would have to be in the Greater Toronto Area, as I am sure you will need to physically hold the hardware, if not just pm me on how you can achieve without the hardware.

Thanks.

Tags: , , , , , ,

Flight Simulation Hardware Concept

Hi,
This project is to make a visual of a concept for flight simulation hardware in a graphics program.

This may be in 3DMax or and program that can be exported and into image files to present the idea in a 3D realistic look.

The projects name is Flight Deck X. It is basically going to be a hardware product for flight simulators.

I will need some to draw my ideas as realistic as possible and work with me over Skype.
I would like to empathize on what I mean by realistic, it has to have colors, the look, and the shape of close to the final product.

The hardware, when built, will have something similar to these dimensions:

24" L, 25" H, 8

Tags: , , , , , ,

Twitter Content On Open Source Hardware

We need someone to create a bunch of open source hardware and electronics related twitter content. We are looking for at least 300 tweets, but would take as many as we can get. Open source hardware (#OSHW) is a lot like open source software except the focus is on building circuit boards and electronics rather than on writing code. See the following links for more info.

http://en.wikipedia.org/wiki/Open-source_hardware
http://harkopen.com/open-source-hardware
http://www.arduino.cc/
http://www.opencollector.org/Whyfree/

The following is a list of content sources to start with.

makezine.com
hackaday.com
www.inmojo.com
harkopen.com

We would like the content in a text file, with 1 tweet per line. common hash tags are as follows.

#OSHW
#openhardware
#Arduino

our twitter feed: http://twitter.com/upverter other popular feeds are as follows.

@make
@adafruit
@solarbotics
@CLElectronics

Tags: , , , , , ,

Writing About Computer Hardware & Android Devices

I am looking for people that are able to rewrite/write technical news articles in correct English (grammar is important as well!). In this project you are bidding price for rewriting/writing 30 articles. If I will like your style you can expect more!

This project is not just about rewriting (I could buy a software than makes this for me)! You will need to write some articles that will get some basic information from the links that I will provide and will inform about that article (for example you will need to write a news about some new hardware review with your thoughts). I will not accept any automatically rewritten articles! Articles must be unique and pass copyscape but it must be unique with a thoughts as well! (Changing words is not enough for me!).

Two of freelancers have already been bidding for my other projects but they were non technical (you must keep most important info about hardware such way that it will make sense and work as keywords!) or were trying to use some dump software that have totally changed sense of articles. To confirm you have read this description please start your bid with "project" as the first word.

Produced articles should be about 200-400 words each (with some exceptions if the news is really short). All should have some personal feel with your thoughts (for example that you like/dislike something or cant wait to buy one etc). Source articles may be longer. I will be providing you urls of news (not all at once but as there something new in topics happens) and you will have up to 48h to write about received news (it ma be a few per day or none at all in some days).

I can pay more per article if it is good quality! So bid accordingly to your skills!

If you want to rise your chances please give me sample of your work with one of this articles:
http://techknowbits.com/1346/archos-introduces-colour-e-reader-and-android-tablets-at-cebit
http://www.hitechlegion.com/reviews/motherboards/8872-gigabyte-gae350nusb3-motherboard-review (hardware review to be done as described)

Tags: , , , , , ,

Simple Set Top Box

We need a device with these features:

HARDWARE:
-Basically it is the size of a small TV set top box
-Had a really simple internal architecture
-Can run a full OS like one of the really small/simple linux distros
-Can output to a TV
-Has two USB ports (which ideally could take a mouse and keyboard for input)
-Has a LAN port (not mandatory)
-Has a microSD slot to expand memory (the internal need only be enough for the OS and some little more)
-Has a port to take a GSM SIM card to access mobile network SMS and data (3G/GPRS/etc)

SOFTWARE:
-The device will be used to run a very small light linux based OS so the hardware does not need to be modern and flashy, just something that can run a lightweight OS, a browser and basic programs with ease. This means that the processor can even be a pentium 3 processor – basically, the hardware does not need to be modern.

OTHER THINGS:
-The device is similar to this one: http://www.linux4.tv/
-The target price of the device is as close to $50 or lower as possible (of course if this is not possible then it can be raised)

REQUIREMENTS
1. Does a device like this exist? If so, we would like you to quote us on supply of the device.

2. We are also interested in engaging you to design and manufacture such a device. Give price to supply complete unit and give price to supply PCB files and BOM only.

PS
Please do not be limited by the price range for this project, we just picked it randomly and know that it can go higher/lower.

Tags: , , , , , ,

STM3210E-EVAL Board + Cam

We need to display color slow-motion picture from external camera on LCD display of STM3210E-EVAL Board.

Requirements:

– must be used some popular low-cost camera (mass production, ex. cam for PC computers)
– no modification of STM3210E-EVAL board, so it means you must use some built-in interface (USB, RS232, GPIO, etc…)
– additional hardware connected between cam and STM3210E is allowed (ex. some converter)

Focus:

– maximalization FPS of motion picture displayed on LCD STM3210E-EVAL board

Output:

– source code and binary of firmware for STM3210E-EVAL Board
– completed technical documentation (schematics, PCB, BOM, source code – if any additional hardware)

Payments:

Full final payment only. No milestones.

Tags: , , , , , , , , , , , , , , , ,

Install And Configure Windows Server 2008 And LytecMD 2010

Need someone to install and configure Windows Server 2008 Standard and LYTEC MD 2010 5-user license. Advise on hardware purchase is also needed. Please have experience with LYTEC MD 2010. Hardware requirements are listed here:
http://www.medipro.com/lytec-md-system-requirements/print.html

Tags: , , , , , , , , , , , , , , , ,

Vehicle Gps Tracker Hardware And Firmware

Hi
i need hardware( schemetic,gerber,firmware with source) of gps tracker. it must be reliable and tested . Following should exist in it?
a. GPRS , SMS based tracking…Standard protocols
b. Two way communication.
c. Tracker device based memory to hold data for about a month.
d. 3 Sim ( stand by to each)
e. 4 input, 4 output.
f. PIC 24/ higher or processor based to accomodate other firmware add ons. should also have space for camera integration.
g. Firmware upgradeable through Remote connection to server. Swap over firmware for easy upgradation.
h. DB 15, RJ 45,Eathernet ,USB connectors
g. High temperature operation.
h. BOM should not exceeed 50 dollar each piece ( in bulk). GSm module must be commonly available and efficient.
j. Few more common …to be finalized after bid.
Regards
Chishti

Tags: , , , , , , , , , , , , , , ,

PHP Function For Generating A Hash Of Host Hardware Profile

Hello Bidders,
We need a PHP function that will generate a one-way hash of the hosts hardware profile salted with a given number. The hardware profile must be unique to the host (maybe – could use specific datafields from the output of the dmidecode command) . The idea is to ensure that our script only runs on that particular host. And the number is used as a further integrity test; it will be passed to the hash function. The hash will then be stored into a file with the name key.

And we need another function that will check against a salted hash to verify integrity of the script. This check script will be given the same salt ( the number ), and will then generate a hash using the hardware profile and salt, compare it with the hash in the file key and return a true or false for the match.

For the right person, this should be a fairly simple project so please bid reasonably.
Any questions, please use PM.
Thanks,
Sam..

Tags: , , , , , , , , , , , , , , , ,

CCD/CMOS Camera Hardware Specialist

Hi All,

We have urgent need for someone who holds strong expertise in CCD/CMOS Camera Hardware Design as well as associated IP development in VHDL.

Skills required ( Must ) :

– Must have strong experience in CCD/CMOS Camera Hardware Development. Must have experience with different kinds of image sensor.
– PCB Schematic, BOM, PCB Placement, Layout, Routing etc.
– IP development for the given hardware in VHDL

we are looking for someone who can work for us remotely on part-time or contract basis. we are looking for someone for long term relationship. we have couple of projects available, we will discuss the project details with the selected person. Please contact us for detail.

I would really appreciate if only serious bidders react on this project work. Applicant should be able to sign MNDA and able to provide References if necessary.

Regards
BalaJi MicroTechnologies Pvt. Ltd.

Tags: , , , , , , , , , , , , , , , ,

Custom Bootdisk To Add One Hardware Module For VMware & XEN

To add the Hitachi HRA380 SAS hardware driver in ESXi 4.1 & Citrix XEN server most recent version for installation.

Requirement & Objective : –
1. To make the HRA380 SAS controller bootable for installation for ESXi 4.1
2. Create a DDK Driver ISO disk image for XEN server for system installation.

Reference File : –
Linux Driver Module Source :
http://www2.hitachi.co.jp/bds/download/files/driver/hra/bs320/rhl_ia32/1_5_4_52/hradrv_1_5_4_52_lin_src.zip
RHEL 5 RPM file :
http://www2.hitachi.co.jp/ubs/pc/ha/download/drv_2010/lin_hradrv_x_5_4_52.exe

Tags: , , , , , , , , , , , , , , , ,

Trademark A Software And Hardware Product

I have a trademark that I would like to protect in US and possibly Europe and more. I realize there are fixed filing fees in most locations so I am looking for a bid that represents the work other than the fees.

The trademark is both hardware and software so in the US I expect it will be a class 09.

I would be impressed if you presented a Non-Disclosure as part of this project.

Thanks

Tags: , , , , , , , , , , , , , ,

Schematic Hardware Building Plus Chip Programming.

To build the hardware up and program the chip. Testing will be provided by user.
-Hardware schematic and software codes will be provided.
Will require the user to understand about H-bridge operation and Program dspic chip using MPlab IDE.

Note: Only require those that are able to finish the Project Fast and able to finish it within 2 – 3 days.

Tags: , , , , , , , , , , , , , , , ,

Embedded Controller Firmware For Hosting Webpage

We have an existing embedded control PC board based a maxim DS80C400 controller that we current use with an interface to our software. All of the hardware has been demonstrated for years so there are no hardware issues to resolve. This project does not have to integrate with any existing software so it is a start from scratch project to create a website host application to provide pass-through of the serial ports, a 2-line, 40 character LCD attached to the display, and about 25 other digital I/O signals. Using the default webpage we would like to be able to enable/disable the output points, have the input points read. This will include allowing the user to write out the serial ports and read the ports back in as well as write to the display. Upon startup we have a specific sequence of beeps to play, then the units MAC and IP addresses are shown in the display. the units use DHCP to obtain IP address. The user should be able to use IE or any other common browser to go to the units IP address and immediately see the units webpage and be able to then directly I/O with the hardware. The UI needs to include the serial port configuration control (baudrate, stopbits, parity, etc.) for the serial ports as well as toggle the port between RS232/RS422. communication over the serial port will generally be ascii but there needs to be a provision for sending hex values such as preceding the value with a 0x?? when we need to send a hex character. There are serial devices connected to the serial ports. The UI also needs to be able to switch an onboard serial port over to modbus communication so that registers in the device(s) attached to two of the onboard serial ports can be displayed and controlled directly

In another phase of this project, a utility will be developed to allow the user search for individual modules on the network and to configure the hardware unit and to sort them into groups. The user will also be able to download their own web page to replace the default webpage in the firmware.

There is an example of a java webserver for this microcontroller on the maxim website. We can provide existing firmware and will provide schematics after a NDA is execuited. We can provide hardware to the winning supplier with a deposit and shipping costs / duties / etc., will be paid by supplier.

Tags: , , , , , , , , , , , , , , , ,

XMEGA RTOS Embedded Platform

The product is a measuring system for qualifying air. Hardware design is finished already. The hardware consists of 4 submodules with a own microcontroller ATXMEGA 128. The submodules are wired with a RS 485 Bus. Software platform is RTOS and development is done in ATMEL Workbench with the Gnu C Compiler. Debugging is done with the ATMEL JTAG Interface.

The first submodule is measuring Watersteam and pressure. Hardware is finalized.
The second Module is measuring Hydrocarbons. The Hardware is finalized.
The third Module is measuring Gas Concentrations: CO, CO2, SO2,NOx, pressure and flow., Hardware is finalized.
The fourth Module is the control master with display interface, relay contacts, analogue output, Data output.

Some Software is ready and the system works in great parts. Actually there are problems with the RTOS that are not solved.

We search a experianced developer, that has good knowledge about RTOS and ATMEL XMEGA Controllers and some project experiance. Persons from abroud are welcome.

Tags: , , , , , , , , , , , , , , , ,

Elastix Setup

We are a medium-sized business and are currently using 8×8 as a phone provider. We plan on creating our own PBX/Voip solution based on the Elastix system (elastix.org). We have around 100 phone users, and need to set up everything from hardware (we plan on using http://www.elastixdepot.com/product.sc?productId=10) to customization of settings. It is not a very difficult task considering the fact that we are going to be using a pre-configured hardware bundle.

Another major requirement is the ability to determine the exact hardware requirements (when it comes to wires, hubs, etc.) as well as give us a time and price estimates of this project.

Tags: , , , , , , , , , , , , , , , ,

WinLicence Cracker Needed

We have no information on what version of winlicence but we assume its the latest.
We are looking for someone to crack Winlicence that is in 2 of our applications.The licence is hardware coded and we beleve it connects externally to another website but are not sure.We are looking for someone to rip out the hardware id completley.
We look forward to replies on this project.Thank you

Tags: , , , , , , , , , , , , , , ,

Web Configurator (choosing Of Hardware Components)

Dear Providers,

for a new web page of us, we want to have a configuration utility.
The clients can configure hardware of server equipment, like CPU, RAM, HDD, Software.

The configuration system should be similar to which is known on www.dell.com, if you
go on some hardware and click on "customize".

The prices should be written for all component, and the total price as well. After
finishing the configuration, the user should be able to submit the configuration to
an PHP script (query). The further evaluation we will do. You only have to make the
configurator, the rest of order process, well do by our own.

As well the configurator shall have some "pre defined" packages. If you click on
one, it will automatically select CPU, RAM, HDD, Software according to the package
and price.

Thanks.

Tags: , , , , , , , , , , , , , , , ,

Application Hardware Lock Bypass

I need someone to help me be able to bypass the hardware lock of an old application.
The application is only an exe file. Nothing else.

Tags: , , , , , , , , , , , , ,

Create A Multi-Touch Surface With Google Earth Installed

The job is simple. You will need to copy or reproduce something similar to Microsoft Surface as instructed below:

http://www.maximumpc.com/article/features/maximum_pc_builds_a_multitouch_surface_computer

And/Or

http://www.instructables.com/id/How-to-build-a-Multi-Touch-surface/

Once the hardware is completed, you will require to install and configure Google Earth over Windows 7 to work with the touch interface without any lagging.

This is a pretty big project and could be on-going for multiple orders if the first one is done well.

I shall NOT be providing you with the hardware, so please BID with your amount INCLUDING the hardware cost.

NOTE: I need INDIAN manufacturers ONLY

Tags: , , , , , , , , , , , , , , , ,

Create A HARDWARE And Software

One of our Client looking for Hardware and Software Developers

www.f r i t z b o x.eu/en/products/F R I T Z Box_Fon_WLAN_7 2 7 0/index.php (take all blank spaces ut and visit the site)

This product retail price is starting from £120gbp but we looking to reduce this amount and give more benefit and functionalities

When you BID doesnt matter what you bid, please give the actual info in PM thanks

When you Bidding or looking for contact:
cost for 5000unit and 1000unit and 500unit and 100unit separately with the specification what Chip ,processor etc.

i just choose medium price range but as you see client looking cost for 5000,1000,500,100 4 different cost price so you need to give this info in PM. thanks

This is the product our client want to create

* Linux Open Source base
* more memory and capability of course
* open for customize and plugin and module based software system.
* Cpu and Chipset need to be high quality and as fast as possible and memory need to be guarantee for life

Basically idea is to create the Hardware and allow people developers to create plugins and modules to earn money.

so this system need to be open for future developing and adding new functionalities

for this our client need contact who can develop the main software and main hardware with everything. If you cant do this and if you have contacts please lets us know we will see if your contact is ok and if our client decide to work with them you will get a introduction commission.

Thanks

Tags: , , , , , , , , , , , , , , , ,

State-Based DB Server

We need to create a simple windows service that will operate 24×7 by polling a database table with the current states and calculating when to switch to the next state using conditional logic. we like to define a set of states via XML and virtual ports,i.e. inputs and outputs of such state. for instance, if the current state is 1 (CS1) and virtual input 1 (VI1) is set to true, then goto CS2. Then CS2 will have a list of actions to execute. This actions for now may just set some virtual outputs and/or run an executable, or invoke a web service via URL, and pass along some basic variables. So the service will write to the tables to set the virtual inputs accordingly, and outside software will read the tables predefined virtual outputs. these may change when a state switches to the next.

this service should be modeled after hardware state machines. only bid if you understand how hardware state machines work. this software will run as a window service, coded preferably in Delphi. please feel free to make suggestions for other languages/platforms.

Tags: , , , , , , , , , , , , , , , ,

Web Configurator (choosing Of Hardware Components)

Dear Providers,

for a new web page of us, we want to have a configuration utility.
The clients can configure hardware of server equipment, like CPU, RAM, HDD, Software.

The configuration system should be similar to which is known on www.dell.com, if you
go on some hardware and click on "customize".

The prices should be written for all component, and the total price as well. After
finishing the configuration, the user should be able to submit the configuration to
an PHP script (query). The further evaluation we will do. You only have to make the
configurator, the rest of order process, well do by our own.

As well the configurator shall have some "pre defined" packages. If you click on
one, it will automatically select CPU, RAM, HDD, Software according to the package
and price.

Thanks.

Tags: , , , , , , , , , , , , , , , ,

APACHE OFBIZ

We are currently seeking a hands on Technical Director candidate to help integrate an ERP software package (APACHE OFBIZ) to address our clients goal of having a single platform from which to drive their business systems.

Qualified candidate will assist in all phases of the project:

Tags: , , , , , , , , , , , , , , , ,

Micro-controller FFT Display

Need C code to perform the following operations:

1) Digitize an analog voltage input using a micro-controller and perform FFT operation
2) Transmit data wirelessly to a PC
3) Display continuously digitized waveforms on a PC in real time

Tags: , , , , , , , , , , , , , , , ,

MikroeC Pro For PIC

We searching developer how are familiar with MikroC pro for Pic for a longer cooperation.
if you use eagle cad this would be fine but is not a must.

there are several small projects like sd card reader, writing on uart or lcd,
sending data with usb.
for this project we will use the library from the mikroeC studio

schematic and hardware concept come from us.
if hardware is needed for development, we will provide the hardware for you.

Tags: , , , , , , , , , , , , ,

Get USB Stick Hardware ID Sample Code In C++

I need some sample code in C or C++ to retrive the hard disk id of an USB stick (not the Volume ID). This must work without Adminstrator/root rights.
Perfect would be examples for Windows and Linux, but each OS alone would be also interesting.

Tags: , , , , , , , , , , , , , , ,

Curtain Hardware Designer Needed

Design 3 unique brackets, finials and rods that have mass product appeal using our new invention. National launch scheduled for August 2010. Your design will go to rapid prototyping then off shore production. Just as Crate and Barrel and Pottery Barn offer their own designs of curtain hardware they still have mass appeal. Designs need to be in SolidWorks or other standard CAD files to be used by Rapid Prototype machines. Job is now.

Tags: , , , , , , , , , , , , , , , ,

Computer Recourse Management System

Our Company has 100s of computer.
We need the system which contain the information about the each computer, include the complete detail of the hardware.

Most Important Feature Which we required:
1) List of Hardware attached with each computer
2) Vender list
3) Brand list
4) Hardware list
5) Which hardware is attached with computer
6) Hardware status
7) Where that computer is deployed
8) Etc.

Tools: ASP.NET, Ajax, and SQL

Tags: , , , , , , , , , , , , , , , ,